Directions
 
 
 

Driving Direction to Marcus & Associates

Marcus & Associates is located at the Millwood Business Center, 358 Saw Mill River Rd. (Route 100), which is approximately 1 mile north of the intersection of the Taconic State Parkway and Route 100.


From the South:

Take the Taconic State Parkway, North to the “Route 100, Route 133”, “Millwood/Briarcliff Manor” exit. At the end of exit ramp (“STOP” sign) make a left onto Campfire Rd. Proceed to “STOP” sign (approximately 1/8 mile). Make a right onto Route 100, North. Continue on Route 100 for approximately ¾ of a mile (through 2 traffic lights) to the Millwood Business Center on your right.

We are located on the first floor, through the lobby to your right.


From Lower Westchester, NYC:

Take the Saw Mill Parkway or the Sprain Parkway North to the Taconic State Parkway. Proceed per above “I”. The “Millwood/Briarcliff Manor” exit is approximately 5-10 minutes from the time you get on the Taconic.


From Connecticut:

A. Take Route 95 South to Exit 21, “Route 287, West” (towards White Plains, Tappan Zee Bridge). Take 287 West to Exit 3, “Sprain Parkway” (North). Continue North on Sprain Parkway which becomes the Taconic State Parkway. Proceed per above, “I”.

B. Take Route 84 West (towards New York State) to Exit 20, “Route 684/White Plains”. Take Route 684 (South) to Exit 6, Route 35 “Katonah/Cross River”. Make right turn at top of exit ramp (traffic light) onto Route 35, West. Move to left lane when possible. Continue past Pepsi Cola Headquarters (on right) to intersection (traffic light) with Route 100. Make left turn onto Route 100 South. Continue on Route 100 South through 2 traffic lights, past Traveler’s Rest restaurant on right. Proceed approximately 1.2 miles past Traveler’s Rest to Millwood Business Center on left. If you come to a shopping center on left hand side, turn around and come back about ¾ of a mile.


From Tappan Zee Bridge:

After toll, get off at 2nd exit, (Exit 8 - “Cross Westchester Expressway/White Plains”, - “Rte 287” (East). Proceed to right lane and immediately exit to Exit 1, “Saw Mill Parkway, North”. Take the Saw Mill for approximately 5-10 minutes to Exit 26, “Taconic Parkway” exit on your right (only goes North).

Proceed per above “From the South


From the North:

Take the Taconic Parkway, South to the “Briarcliff Manor/Millwood” exit (immediately after “Mt. Kisco, Next Exit” sign).Make a right turn onto Route 100, North at the end of exit ramp (traffic light).

Proceed per “From the South””.